The Seattle is a PREMIUM model manufactured with 70mm (2-3/4″) thick wall logs. Modifications can be made without cost providing no additional materials are required. Home is 45′ x 30′ for a total of 1350 sq’ This 3 or 4 bedroom home has a model roof design, 4′ wide hallway and vaulted ceilings over 13′ high. Home is delivered to site and ready to assemble on a concrete slab or wood sub floor
Wall insulating kit: Add 10% to sale price, includes metal stud brackets with 3/4″ tongue & groove wall cover boards 
Energy efficiency: 2×4 or 2×6 studs are be used to install insulation of your choice. Our solid wood walls add an additional R 4.4 and have virtually no heat or cold transfer, increasing the overall thermal and comfort benefits.
Tip: Mineral wool insulation is recommended for log construction. It’s impervious to moisture with a higher R-value per inch than fiberglass, reduces noise levels & is environmentally friendly
Insulating the roof: Apply locally supplied materials to add rafters over the tongue & groove roof 
boards. The build up depth is determined by the required R-value in the ceiling to meet local building codes. High density spray foam provides maximum benefits, highest R-value for thickness & is water proof. These added rafters also increase the roof load capacity
Assembly: The model can be assembled in approximately 12 days with 3 people
Tip: House wraps & vapor barriers are required in most regions when insulating. Vapor barriers are installed on the warm side of walls, interior of the studs for cold climates and exterior of studs for hot climates
Building Codes: Premium series homes & cabins are manufactured to meet all structural requirements for building codes including, California Title 24, earthquake, heavy snow load regions and hurricane zones
Kit includes:
- FREE SHIPPING some exceptions apply
- no floor, ready to assemble on a concrete slab or wood foundation
- pre-cut, numbered exterior walls
- pre-cut, numbered interior walls
- pre-cut, numbered gable components
- vaulted, cathedral ceilings
- pre-cut, 100mm x 200mm (4″x8″) numbered roof purlins, beams, spaced 558mm (22″) or less
- pre-cut, numbered (18mm) 3/4″ tongue & groove roof boards
- pre-cut, numbered fascia boards
- 6 interior doors 900mm x 2040mm (36″x80″)
- 4 single wide wood windows 765mm x 990mm (30″x 39″)
- 6 double wide wood windows 1530mm x 990mm (60″x 39″)
- 1 single wide wood windows 530 x 530 (21″x 21″)
- 2 exterior doors 990mm x 2040mm (36″x80″) 1/2 glass tempered
- hardware for doors & windows
- threaded steel storm rods for perimeter wall junctions
- 2 spare wall logs/spare roof boards
- 400 – 8″ log screws to connect first 2 rows, gable components, purlins
