Sequoia*

FREE SHIPPING – some exceptions apply

The Sequoia has a modern flat sloped roof design with a footprint is 24′ x 40′ (960 sq’) with an open living space a kitchen, 3 bedrooms, 2 bath plus utility room. The front wall height is 119″ tapering down to 95″‘ at the back wall with an vaulted/cathedral ceiling. This model shows the insulating kit on the exterior. Studs are applied on the outside, the wall is insulated, electrical wiring is installed & the exterior is covered with tongue & groove wall boards, Masonite or Hardy board siding or even stucco. This method of insulating is necessary in desert climates to preserve the wood from excessive heat but the interior maintains the all wood look.

Wall insulating kit: Add 10% to sale price, includes metal stud brackets with 3/4″ tongue & groove wall cover boards

Energy efficiency: 2×4 or 2×6 studs are be used to install insulation of your choice. Our solid wood walls add an additional R 4.4 and have virtually no heat or cold transfer, increasing the overall thermal and comfort benefits.

Tip: Mineral wool insulation is recommended for log construction. It’s impervious to moisture with a higher R-value per inch than fiberglass, reduces noise levels & is environmentally friendly

Insulating the roof: Apply locally supplied materials to add rafters over the tongue & groove roof boards. The build up depth is determined by the required R-value in the ceiling to meet local building codes. High density spray foam provides maximum benefits, highest R-value for thickness & is water proof. These added rafters also increase the roof load capacity

Assembly: The model can be assembled in approximately 10 days with 3 people

Tip: House wraps & vapor barriers are required in most regions when insulating. Vapor barriers are installed on the warm side of walls, interior of the studs for cold climates and exterior of studs for hot climates

Building Codes: Premium series homes & cabins are manufactured to meet all structural requirements for building codes including, California Title 24, earthquake, heavy snow load regions and hurricane zones

Kit includes:

FREE SHIPPING some exceptions apply
no floor, ready to assemble on a concrete slab or wood foundation
pre-cut, numbered exterior walls
pre-cut, numbered interior walls
pre-cut, numbered gable components
vaulted, cathedral ceilings
pre-cut, 100mm x 200mm (4″x8″) numbered roof purlins, beams, spaced 558mm (22″) or less
pre-cut, numbered (18mm) 3/4″ tongue & groove roof boards
pre-cut, numbered fascia boards
6 interior doors 900mm x 2040mm (36″x80″)
5 single wide wood windows 765mm x 990mm (30″x 39″)
4 double wide wood windows 1530mm x 990mm (60″x 39″)
2 single wide wood windows 530 x 530 (21″x 21″)
2 exterior door 990mm x 2040mm (36″x80″) 1/2 glass tempered
hardware for doors & windows
threaded steel storm rods for perimeter wall junctions
2 spare wall logs/spare roof boards
400 – 8″ log screws to connect first 2 rows, gable components, purlins